Images May Not be Vehicle Specific. For Display Purposes Only.

AEM Water Injection Kit UNIVERSAL

Fitments

UNIVERSAL
30-3300 V2 Water/Methanol Injection Kit
Standard Controller
Internal MAP w/ 35psi max, 200psi WM Pump
Conductive Fluid Level Sensor
1 Gallon Reservoir
30-3301 V2 Water/Methanol Injection Kit, HD Controller
Internal MAP w/ 40psi max, 200psi WM Pump
Conductive Fluid Level Sensor
5 Gallon Reservoir
30-3003 Water/Methanol Injection Filter
30-3015 Recirculation-Style Pump
250psi H2O/Methanol Injection
35-4500-20 Water/Methanol Injection Nylon Hose
Length 20ft
Size 1/4in
30-3304 V2 Water/Methanol Standard Controller Kit
Internal MAP w/ 35psi max
30-3306 V2 Water/Methanol HD Controller Kit
Internal MAP w/ 40psi max
30-3324 Wiring Harness
For V2 Controller w/ Multi Input
30-3352 V2 Water/Methanol Nozzle & Controller Kit
Multi Input Controller
0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP
200psi WM Pump
Conductive Fluid Level Sensor
NO TANK INCLUDED
30-3312 V2 Water/Methanol Injection Nozzle & Jet Kit
Includes T Fitting, Hose, 250cc, 500cc, & 1000cc jets
30-3320 V2 Water/Methanol Injection
5 Gallon Tank Kit w/ Conductive Fluid Level Sensor
30-3350 V2 Water/Methanol Injection Kit
Multi Input Controller
0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP
200psi WM Pump
Conductive Fluid Level Sensor
1 Gallon Reservoir
30-3303 V2 Water/Methanol Nozzle & Controller Kit
HD Controller
Internal MAP w/ 40psi max, 200psi WM Pump, Jets
NO TANK INCLUDED
30-3322 V2 Water/Methanol Conductive Fluid Level Sensor & Flying Lead Connector
30-3323 Wiring Harness
For V2 Controller w/ Internal MAP Sensor
For Standard or HD Kits
30-3351 V2 Water/Methanol Injection Kit
Multi Input Controller
0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP
200psi WM Pump
Conductive Fluid Level Sensor
5 Gallon Reservoir
30-3302 V2 Water/Methanol Nozzle & Controller Kit
Standard Controller
Internal MAP w/ 35psi max, 200psi WM Pump, Jets
NO TANK INCLUDED
30-3305 V2 Water/Methanol Multi Input Controller Kit
0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP
30-3018 Recirculation-Style Pump
200psi H2O/Methanol Injection
w/ 3/8" NPT Fittings
30-3325 1.15-Gallon Water Methanol Injection Tank
30-3326 High-Flow Low-Current WMI Solenoid

Product Description

The AEM Water Injection Kit is a safe and economical way to reduce air inlet temperatures to increase boost pressure for more power. Lower air inlet temperatures allow users to advance timing without having to run higher-octane fuel. This is the most complete kit available on the market straight out of the box- no additional parts required.

STANDARD WATER INJECTION KIT

  • Universal kit includes everything you need for installation
  • Progressive, controller-driven 150 PSI pump
  • One-gallon tank with integral fluid level sensor
  • Dash light for system status and low fluid warning
  • Alcohol Compatible (up to 50% in solution with water)
  • Progressive controller, provides boost-dependent
    variable flow
  • Output provided to either decrease timing or boost if the system runs out of fluid or detects an error
  • Includes three jets to match your power requirement

HD WATER INJECTION KIT

  • Kit includes everything needed for installation
  • Large-capacity 5-gallon reservoir with integral fluid level sensor
  • Boost Safe lets you retard the timing or reduce boost if the system runs out of fluid or detects an error
  • Progressive, controller-driven 150-PSI pump provides boost-dependent variable flow
  • Dash light relays system status and low fluid warning
  • Methanol & alcohol compatible (up to 50% in solution with water)
  • Includes jets to match your power requirements
  • Reduces exhaust gas temperatures (EGTs) and inlet air temps on turbo-diesel and gas applications

Product Reviews

Be the first to review this item.

Rating
Title
Review